GL10-M1NC1-T
Rugged, IP69K, Outdoor Rated, 100mm 3-Color Flashing Beacon with CAN Connection

Rugged, 100mm diameter flashing beacon at 12-24V DC with CAN Communication. Built for tough conditions including use on construction and agricultural machinery.

• Rated IP69K (Dust tight, high-temperature and high-pressure washdown safe)
• Vibration Resistance of 110m/s2
• Impact Resistance of 1,000m/s2
• SAE J1939
• Ventilation with filter function to avoid fogging from condensation
• Red, Amber, and Green vibrant colors all in one unit
• Efficient light emission for visibility under intense sunlight
• 13 flash patterns and 4 levels of dimming can be configured through communication control
• Light color and flash pattern statuses can be acquired and monitored through CAN bus protocol

* This product does not have a terminating resistor for CAN bus. A separate terminating resistor must be provided (typ. 120-ohm)

**Distinct flash patterns are allocated for each color to assist individuals with color vision deficiencies.

Size	φ100 diameter
Rated Voltage	12-24V DC
Operating Ambient Temperature	-40°C - +85°C
Operating Ambient Humidity	Less than 90% (No condensation)
Storage Ambient Temperature	-40°C - +85°C
Storage Ambient Humidity	Less than 90% (No condensation)
Mounting Location	Indoor/Outdoor (Construction equipment allowed)
Mounting Direction	Upright
Protection Rating	IP6X, IPX6, (IEC 60529), IPX9K (ISO 20653)
Mass	840g
Communication Specification	CAN
Communication Protocol	SAE J1939
Conformity Standards	EN ISO 13766-1 EN IEC 63000 Conforms to the CE requirements Conforms to the UKCA requirements

DOWNLOAD
GL10-M1NC1_Specifications.pdf

Overload Prevention lights for construction sites


Proximity Warning Light System for construction sites


Status indication for the automation and remote operation of construction machinery


Also suitable for agricultural machinery and other equipment that requires vibration and water resistance